Newcastle University

Publications

Year: 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1979

• Korsunsky AM, Wells KE, Shaw BA. A comparative study of diffraction methods for strain measurement in a particulate MMC. In: ECRS 5: proceedings of the Fifth European Conference on Residual Stresses. 1999, Delft-Noordwijkerhout, The Netherlands: Trans Tech Publications.
• Hale JM, Tuck J. A novel thick-film strain transducer using piezoelectric paint. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1999, 213(6), 613-622.
• Hale JM, Tuck J. A novel thick-film strain transducer using piezoelectric paint. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1999, 213(6), 613-622.
• Swailes DC, Devenish BJ, Sergeev YA, Kurdyumov VN. A PDF model for dispersed particles with inelastic particle-wall collisions. Physics of Fluids 1999, 11, 1858-1868.
• Colls R, Hale JM. A simplified dynamic model for high-speed roller chains. In: 1st International Conference on the Integration of Dynamics, Monitoring and Control (DYMAC 99). 1999, Manchester, UK: A A Balkema Publishers.
• Taylor PM, Bicker R. Adaptive assembly of dimensionally variant components. International Journal of Clothing Science and Technology 1999, 11(6), 79-80.
• Refoufi L, Al Zahawi BAT, Jack AG. Analysis and modeling of the steady state behavior of the static Kramer induction generator. IEEE Transactions on Energy Conversion 1999, 14(3), 333-339.
• Bull SJ. Can scratch testing be used as a model for the abrasive wear of hard coatings?. Wear 1999, 233-235, 412-423.
• Agnew B, Talbi M, Mostafavi M. Combined power and cooling, an analysis of the combined Diesel-absorption cycle. Applied Thermal Engineering 1999, 19(10), 1097-1105.
• Jack AG, Mecrow BC, Maddison CP. Combined radial and axial permanent magnet motors using soft magnetic composites. In: Ninth International Conference on Electrical Machines and Drives. 1999, Canterbury , UK: IEEE.
• Ahmad-Shariff A, Ashby R, Metcalfe AV, Swailes DC. Comparison of experimental assessment methods to estimate the strength of gear teeth. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1999, 213(3), 291-301.
• Lewis C, Mortimer P, Robinson M. Could freight trains be as flexible as trucks?. Freight Management International 1999, 22-24.
• Pozzi M, King T. Dynamic characteristics of piezoelectric multilayer stack actuators. In: Recent Advances in Mechatronics: 2nd International Conference on Recent Advances in Mechatronics (ICRAM). 1999, Istanbul, Turkey: Boğaziçi University Publications.
• Moorthy V, Vaidyanathan S, Jayakumar T, Baldev R, Kashyap BP. Effect of tensile deformation on micro-magnetic parameters in 0.2% carbon steel and 2.25Cr-1Mo steel. Acta Materialia 1999, 47(6), 1868-1879.
• Atkinson DJ, Haylock JA, Mecrow BC, Jack AG. Enhanced current control of high-speed PM machine drives through the use of flux controllers. IEEE Transactions on Industrial Applications, 35, No5, 1030-1038 1999.
• Petrie C. Extensional flows. In: D.A. Siginer, D. De Kee and R.P. Chhabra, ed. Advances in the Flow and Rheology of Non-Newtonian Fluids. Amsterdam and New York: Elsevier, 1999, pp.613-636.
• Dodds N, Gibson AG. Fire behaviour of structural composites. In: Design and Application of Composites for the Offshore Oil and Gas Industry. 1999, Aberdeen: Professional Pub. for the Institution of Mechanical Engineers.
• McNiew ME, Burdess JS, Harris AJ, Young M. High aspect ratio ring gyroscopes fabricated in <100> silicon on insulator (SOI) material. In: 10th International Conference on Solid-State Sensors and Actuators. 1999, Sendai, Japan.
• Mortimer PN, Robinson AM. Innovation in rail freight vehicles and operations - status quo or all change?. In: IMechE Seminar Rail Technology for the Future: Seminar 1 - Railways, Objectives and Management. 1999, Earls Court Conference Centre, London.
• Chin C, Lau M. Measurement and Control of a Thruster for Unmanned Robotic Vehicle (URV. In: 5th National Undergraduate Research Opportunities Programme (NUROP) Congress. 1999, Singapore: NTU.
• Haylock JA, Mecrow BC, Jack AG, Atkinson DJ. Operation of fault tolerant machines with winding failures. IEEE Transactions on Energy Conversion 1999, 14(4), 1490 - 1495.
• Jack AG, Mecrow BC, Dickinson PG, Stephenson D, Burdess JS, Fawcett JN, Evans T. Permanent magnet machines with powdered iron cores and pre-pressed windings. In: Industry Applications Conference: 34th IAS Annual Meeting. 1999, Phoenix, AZ: IEEE.
• T J Joyce,A Unsworth,T M Cartwright,D Monk. Preliminary comparison of the wear of silane XLPE with that of UHMWPE, both polymers rubbing against hard counterfaces. Journal of Bone and Joint Surgery (British and European Edition) 1999, 81B(Supplement I), 85.
• Swailes DC, Darbyshire KFF. Probabilistic models for particle and scalar transport in fluctuating flows: An evaluation of simple closure approximations. Physica A: Statistical Mechanics and its Applications 1999, 262(3-4), 307-327.
• Perry AJ, Matossian JN, Bull SJ, Proskurovsky DI, Rice-Evans PC, Page TF, Geist DE, Taylor J, Vajo JJ, Doty RE, Rotshtein VP, Markov AB. Rapid thermal processing of TiN coatings deposited by chemical and physical vapor deposition using a low-energy, high-current electron beam: Microstructural studies and properties. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 1999, 30(11), 2931-2939.
• Kotsikos G, Bland JH, Gibson AG. Rheological characterization of commercial glass mat thermoplastics (GMTs) by squeeze flow testing. Polymer Composites 1999, 20(1), 114-123.
• Davidson RI. Rotary Indexing Drives for Accurate Positioning. Proc. 2nd International Conference on the Control of Industrial Processes, Newcastle, , 156-159 1999.
• Perry AJ, Matossian JN, Bull SJ, Proskurovsky DI, Rice-Evans PC, Page TF, Geist DE, Taylor J, Vajo JJ, Doty RE, Rotshtein V, Markov AB. The effect of rapid thermal processing (RTP) on TiN coatings deposited by PVD and the steel-turning performance of coated cemented carbide. Surface and Coatings Technology 1999, 120-121, 337-342.
• Bull SJ, Evans JT, Shaw BA, Hofmann DA. The effect of the white layer on micro-pitting and surface contact fatigue failure of nitrided gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1999, 213(4), 305-313.
• Airoldi G, Piredda S, Pozzi M, Shelyakov AV. The electrical resistance of Ni/sub 50/Ti/sub 30/Hf/sub 20/ and Ni/sub 50/Ti/sub 40.5/Hf/sub 9.5/ melt-spun ribbons during current-driven thermal cycles. In: International Symposium and Exhibition on Shape Memory Materials (SMM). 1999, Kanazawa, Japan: Trans Tech Publications Ltd.
• M. Pozzi,G. Airoldi. The electrical transport properties of shape memory alloys. Materials Science & Engineering: A-Structural Materials Properties Microstructure & Processing 1999, 273, 300-304.
• G. Airoldi,M. Pozzi. The electrical transport properties of shape memory alloys under a stress state. Journal of Engineering Materials & Technology-Transactions of the ASME 1999, 121(1), 108-11.
• Mortimer P, Robinson AM. The need for innovation in rail freight vehicles and operations. In: IMechE Conference Millennium Railways. 1999, Keele University.
• Petrie CJS. The rheology of fibre suspensions. Journal of Non-Newtonian Fluid Mechanics 1999, 87(2-3), 369-402.
• T J Joyce,M DallaMura,A Unsworth. The wear of ultra high molecular weight polyethylene against itself: influence of irradiation, lubricant and rotation. Journal of Bone and Joint Surgery (British and European Edition) 1999, 81B(Supplement I), 85-86.
• Bull SJ, Hainsworth SV. Time-dependent changes in the mechanical properties of diamond-like carbon films. Surface and Coatings Technology 1999, 122(2-3), 225-229.
• Kotsikos G, Evans JT, Gibson AG, Hale J. Use of Acoustic Emission to Characterize Corrosion Fatigue Damage Accumulation in Glass Fiber Reinforced Polyester Laminates. Polymer Composites 1999, 20(5), 689-696.