Newcastle University

Projects

• Bearing Reliability Test Rig
  Project Leader(s): Dr Brian Shaw
• CHARMA
  Project Leader(s): Dr Brian Shaw
• HEMOW
  Project Leader(s): Professor GY Tian (EECE)
• Qinetiq MOD Gear Bending Project
  Project Leader(s): Dr BA Shaw
• Samulet TSB Project
  Project Leader(s): Dr BA Shaw
• T-20 Test Rig
  Project Leader(s): Dr BA Shaw
• Tata Steel Electric Vehicle Electric Motor and Gearbox
  Project Leader(s): Mr JD Widmer (EECE)
• X-Gear: Development of gear drive trains based on new materials and novel gear systems
  Project Leader(s): Dr Brian Shaw

• Moorthy V, Shaw BA. An observation on the initiation of micro-pitting damage in as-ground and coated gears during contact fatigue. Wear 2013, 297(1-2), 878-884.
• Evans HP, Snidle RW, Sharif KJ, Shaw BA, Zhang J. Analysis of Micro-Elastohydrodynamic Lubrication and Prediction of Surface Fatigue Damage in Micropitting Tests on Helical Gears. Journal of Tribology 2013, 135(1), 011501.
• Moorthy V, Shaw BA. Contact fatigue performance of helical gears with surface coatings. Wear 2012, 276, 130-140.
• Moorthy V, Shaw BA. Effect of as-ground surface and the BALINIT (R) C and Nb-S coatings on contact fatigue damage in gears. Tribology International 2012, 51, 61-70.
• Zhang J, Shaw BA. The Effect of Superfinishing on the Contact Fatigue of Case Carburised Gears. In: ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY. 2011, LAUBLSRUTISTR 24, CH-8717 STAFA-ZURICH, SWITZERLAND: TRANS TECH PUBLICATIONS LTD.
• Onsy A, Bicker R, Shaw B. A novel intelligent health monitoring system for gear fatigue failure prediction. In: Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management (COMADEM). 2010, Nara, Japan: Society of Plant Engineers.
• Onsy A, Bicker R, Shaw B. Intelligent diagnostic health management of power transmission systems: An experimental validation. International Journal of COMADEM 2010, 13(2), 46-58.
• Gryllias K, Gelman L, Shaw B, Vaidhianathasamy M. Local damage diagnosis in gearboxes using novel wavelet technology. Insight: Non-Destructive Testing and Condition Monitoring 2010, 52(8), 437-442.
• Shaw BA, Aylott CJ, Oila A, Jao TC. Characterisation of microstructural transformations in micropitted gears. In: Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition. 2009, Lake Buena Vista, FL, United states: Society of Tribologists and Lubrication Engineers.
• Wilson JW, Tian GY, Moorthy V, Shaw BA. Magneto-Acoustic Emission and Magnetic Barkhausen Emission for Case Depth Measurement in En36 Gear Steel. IEEE Transactions on Magnetics 2009, 45(1), 177-183.
• Hong T, Ooi JY, Shaw B. A numerical simulation to relate the shot peening parameters to the induced residual stresses. Engineering Failure Analysis 2008, 15(8), 1097-1110.
• Hong T, Ooi JY, Shaw BA. A numerical study of the residual stress pattern from single shot impacting on a metallic component. Advances in Engineering Software 2008, 39(9), 743-756.
• Hong T, Ooi JY, Shaw BA. A three-dimensional finite element analysis of two/multiple shots impacting on a metallic component. Structural Engineering and Mechanics 2008, 29(6), 709-729.
• Vaidhianathasamy M, Shaw BA, Bennett W, Hopkins P. Assessment of Grinding Damage on Gear Teeth using Magnetic Barkhausen Noise Measurements. In: 12th International Workshop on Electromagnetic Nondestructive Evaluation. 2008, Cardiff: IOS Press.
• Vaidhianathasamy M, Shaw BA, Bennett W, Hopkins P. Evaluation of Contact Fatigue Damage on Gears using the Magnetic Barkhausen Noise Technique. In: 12th International Workshop on Electromagnetic Nondestructive Evaluation. 2008, Cardiff: IOS Press.
• Moorthy V, Shaw BA. Magnetic Barkhausen emission measurements for evaluation of material properties in gears. Nondestructive Testing and Evaluation 2008, 23(4), 317-347.
• Jao T, Guevremont J, Rollin A, Carter R, Aylott C, Shaw B. Martensite decay in gears under contact stress. In: Society of Tribologists and Lubrication Engineers: Annual Meeting and Exhibition. 2008, Cleveland, Ohio, USA.
• Petit-Renaud F, Evans JT, Metcalfe AV, Shaw BA. Optimization of a shot peening process. Journal of Materials: Design and Applications 2008, 222(4), 277-289.
• Petit-Renaud F, Evans JT, Metcalfe AV, Shaw BA. Optimization of a shot peening process. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 2008, 222(4), 277-289.
• Blaow M, Evans JT, Shaw BA. The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel. Journal of Materials Science 2007, 42(12), 4364-4371.
• Blaow M, Evans JT, Shaw BA. Effect of hardness and composition gradients on Barkhausen emission in case hardened steel. Journal of Magnetism and Magnetic Materials 2006, 303(1), 153-159.
• Moorthy V, Shaw BA, Hopkins P. Surface and subsurface stress evaluation in case-carburised steel using high and low frequency magnetic barkhausen emission measurements. Journal of Magnetism and Magnetic Materials 2006, 299(2), 362-375.
• Jao TC, Rollin AJ, Carter III RO, Aylott CJ, Shaw BA. Influence of material property on micropitting and pitting behavior. In: Proceedings of the World Tribology Congress III. 2005, Washington, DC, USA: ASME.
• Moorthy V, Shaw BA, Hopkins P. Magnetic Barkhausen emission technique for detecting the overstressing during bending fatigue in case-carburised En36 steel. NDT and E International 2005, 38(2), 159-166.
• Moorthy V, Shaw BA, Mountford P, Hopkins P. Magnetic Barkhausen emission technique for evaluation of residual stress alteration by grinding in case-carburised En36 steel. Acta Materialia 2005, 53(19), 4997-5006.
• Blaow M, Evans JT, Shaw BA. Magnetic barkhausen noise: The influence of microstructure and deformation in bending. Acta Materialia 2005, 53(2), 279-287.
• Oila A, Shaw BA, Aylott CJ, Bull SJ. Martensite decay in micropitted gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2005, 219(2), 77-83.
• Abudaia FB, Evans JT, Shaw BA. Spherical indentation fatigue cracking. Materials Science and Engineering A 2005, 391(1-2), 181-187.
• Blaow M, Evans JT, Shaw BA. Surface decarburisation of steel detected by magnetic barkhausen emission. Journal of Materials Science 2005, 40(20), 5517-5520.
• Blaow M, Evans JT, Shaw B. Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel. Materials Science and Engineering A 2004, 386(1-2), 74-80.
• Moorthy V, Shaw BA, Day S. Erratum: Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique (vol 52, pg 1927, 2004). Acta Materialia 2004, 52(12), 3747-3751.
• Moorthy V, Shaw BA, Day S. Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique. Acta Materialia 2004, 52(7), 1927-1936.
• Page TF, Shaw BA. Scanning electron acoustic microscopy (SEAM): A technique for the detection of contact-induced surface & sub-surface cracks. Journal of Materials Science 2004, 39(22), 6791-6805.
• Moorthy V, Shaw BA, Brimble K. Testing of case depth in case carburized gear steels using magnetic barkhausen emission technique. Materials Evaluation 2004, 62(5), 523-527.
• Abudaia FB, Evans JT, Shaw BA. Characterization of retained austenite in case carburized gears and its influence on fatigue performance. Gear Technology 2003, 20(3), 12-16.
• Moorthy V, Shaw BA, Evans JT. Evaluation of tempering induced changes in the hardness profile of case-carburised EN36 steel using magnetic Barkhausen noise analysis. NDT & E International 2003, 36(1), 43-49.
• Shaw BA, Aylott C, O'Hara P, Brimble K. The role of residual stress on the fatigue strength of high performance gearing. In: International Journal of Fatigue: International Conference on Fatigue Damage of Structural Materials. 2003, Hyannis, Massachusetts, USA: Elsevier Ltd.
• Korsunsky AM, James KE, Aylott C, Shaw BA. Residual stresses in induction-hardened gear teeth mapped by neutron diffraction. Journal of Strain Analysis for Engineering Design 2002, 37(4), 337-344.
• Brimble K, Atkins I, Blencoe K, Aylott C, Shaw BA. A comparison of micro-pitting performance of identical oils using standard FZG test gears and helical test gears. Journal of Naval Engineering 2001, 40(1), 47 - 64.
• Shaw BA, Abudaia FB, Evans JT. Characterization of Retained Austenite in Case Carburized Gears and Its Influence on Fatigue Performance. In: HeatTreating 2000: Proceedings of the 20th Conference. 2001, St Louis, Missouri: Materials Information Society.
• Moorthy V, Hopkins P, Shaw BA. Material Quality Determination using Barkhausen Noise Analysis. Journal of the American Society of Naval Engineers 2001, 39(3), 442-455.
• Shaw BA, Abudaia FB, Evans JT. Characterization of retained austenite in case carburized gears and its influence on fatigue performance. In: 20th Annual Conference on Heat Treating. 2000, St Louis, Missouri, USA: ASM International.
• Korsunsky AM, Wells KE, Shaw BA. Comparative study of diffraction methods for strain measurement in a particulate MMC. Materials Science Forum 2000, 347-349, 504-509.
• Hyde TR, Evans JT, Shaw BA. Effect of Stress and Heat Treatment on Magnetic Barkhausen Emission in Case Carburized Steels. Materials Evaluation 2000, 58(8), 985-990.
• Hale JM, Shaw BA, Speake SD, Gibson AG. High temperature failure envelopes for thermosetting composite pipes in water. Plastics, Rubber and Composites 2000, 29(10), 539-548.
• Shaw BA, Ashby R, Evans JT, O'Hara P. The Use of Controlled Post Heat Treatment Cleaning and Peening to Enhance the Fatigue Strength and Reliability of Case Carburized Gears. In: 20th Annual Conference on Heat Treating. 2000, St Louis, Missouri, USA: ASM International.
• Korsunsky AM, Wells KE, Shaw BA. A comparative study of diffraction methods for strain measurement in a particulate MMC. In: ECRS 5: proceedings of the Fifth European Conference on Residual Stresses. 1999, Delft-Noordwijkerhout, The Netherlands: Trans Tech Publications.
• Bull SJ, Evans JT, Shaw BA, Hofmann DA. The effect of the white layer on micro-pitting and surface contact fatigue failure of nitrided gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1999, 213(4), 305-313.
• Shaw BA, Calik Y, Evans JT. Residual shear stress near ground surfaces. Scripta Materialia, 34, 1101-1106 1996.
• Shaw BA, Hong JS, Gao L, Thompson DP. Silicon carbide-toughened zirconia ceramics. J. Mater Sci., 31, 957-962 1996.