Publications

• Gelman L, Kolbe S, Shaw B, Vaidhianathasamy M. Novel adaptation of the spectral kurtosis for vibration diagnosis of gearboxes in non-stationary conditions. insight 2017, 59(8), 434-439.
• Gelman L, Solinski K, Shaw B, Vaidhianathasamy M. Vibration diagnosis of a gearbox by wavelet bicoherence technology. Insight 2017, 59(8), 440-444.
• Moorthy V, Shaw BA. Contact fatigue performance of helical gears with surface coatings. Wear 2012, 276-277, 130-140.
• Moorthy V, Shaw BA. Effect of as-ground surface and the BALINIT (R) C and Nb-S coatings on contact fatigue damage in gears. Tribology International 2012, 51, 61-70.
• Gryllias K, Gelman L, Shaw B, Vaidhianathasamy M. Local damage diagnosis in gearboxes using novel wavelet technology. Insight: Non-Destructive Testing and Condition Monitoring 2010, 52(8), 437-442.
• Wilson JW, Tian GY, Moorthy V, Shaw BA. Magneto-Acoustic Emission and Magnetic Barkhausen Emission for Case Depth Measurement in En36 Gear Steel. IEEE Transactions on Magnetics 2009, 45(1), 177-183.
• Vaidhianathasamy M, Shaw BA, Bennett W, Hopkins P. Assessment of Grinding Damage on Gear Teeth using Magnetic Barkhausen Noise Measurements. In: 12th International Workshop on Electromagnetic Nondestructive Evaluation. 2008, Cardiff: IOS Press.
• Vaidhianathasamy M, Shaw BA, Bennett W, Hopkins P. Evaluation of Contact Fatigue Damage on Gears using the Magnetic Barkhausen Noise Technique. In: 12th International Workshop on Electromagnetic Nondestructive Evaluation. 2008, Cardiff: IOS Press.
• Moorthy V, Shaw BA. Magnetic Barkhausen emission measurements for evaluation of material properties in gears. Nondestructive Testing and Evaluation 2008, 23(4), 317-347.
• Moorthy V, Shaw BA, Hopkins P. Surface and subsurface stress evaluation in case-carburised steel using high and low frequency magnetic barkhausen emission measurements. Journal of Magnetism and Magnetic Materials 2006, 299(2), 362-375.
• Moorthy V, Shaw BA, Hopkins P. Magnetic Barkhausen emission technique for detecting the overstressing during bending fatigue in case-carburised En36 steel. NDT and E International 2005, 38(2), 159-166.
• Moorthy V, Shaw BA, Mountford P, Hopkins P. Magnetic Barkhausen emission technique for evaluation of residual stress alteration by grinding in case-carburised En36 steel. Acta Materialia 2005, 53(19), 4997-5006.
• Moorthy V, Shaw BA, Day S. Erratum: Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique (vol 52, pg 1927, 2004). Acta Materialia 2004, 52(12), 3747-3751.
• Moorthy V, Shaw BA, Day S. Evaluation of applied and residual stresses in case-carburised En36 steel subjected to bending using the magnetic Barkhausen emission technique. Acta Materialia 2004, 52(7), 1927-1936.
• Moorthy V, Shaw BA, Brimble K. Testing of case depth in case carburized gear steels using magnetic barkhausen emission technique. Materials Evaluation 2004, 62(5), 523-527.
• Raj B, Moorthy V, Jayakumar T, Rao KBS. Assessment of microstructure and mechanical properties of metallic materials by non-destructive characterization. International Materials Review 2003, 48(5), 273-325.
• Moorthy V, Hopkins P, Shaw BA. Material Quality Determination using Barkhausen Noise Analysis. Journal of the American Society of Naval Engineers 2001, 39(3), 442-455.
• Moorthy V, Vaidyanathan S, Jayakumar T, Baldev R, Kashyap BP. Effect of tensile deformation on micro-magnetic parameters in 0.2% carbon steel and 2.25Cr-1Mo steel. Acta Materialia 1999, 47(6), 1868-1879.
• V. Moorthy, S.Vaidyanathan, T. Jayakumar, Baldev Raj. On the influence of tempered Microstructures on magnetic Barkhausen emission in ferritic steels. Philosophical Magazine A 1998, 77(6), 1499-1514.
• V. Moorthy, S.Vaidyanathan, T. Jayakumar, Baldev Raj. Evaluation of Post weld heat treatment in 2.25Cr-1Mo steel tube to tube sheet weld joint using Magnetic Barkhausen Noise Measurement. Mater. Sci. Tech 1997, 13(7), 614-617.